High CPU usage from Node JS when launching Mirabox Craft

vleds123

Hello, I recently purchased a 9.2 inch screen and after using the software and connecting it, everything works well except the intense CPU usage from node JS which is related to mirabox software. How can I reduce CPU consumption or redirect to GPU? Thank you

dockkey2023

Please send me a screenshot of your software version number, as our latest version allows for the selection of different graphics cards

vleds123

Thank you for answering. I am not able to access the two settings from the application as it crashes everytime I launch it. But I downloaded the software yesterday so it must be updated.

When i was able to access the settings yesterday I never noticed the selection of different graphics cards.

Anything else I can try?

vleds123

Software version: 5.1.016.1124 and using latest version


Firmware version: V3_D92_9.16_02.009 and latest version

dockkey2023

vleds123 发表于 2025-12-18 03:16
Software version: 5.1.016.1124 and using latest version

现在有最新的版本了，是5.1.016.1216，应该是已经发布了，如果没有，也是在做认证

bloodrock

我也有同样的问题，屏幕本身的功耗并不高，大约2w左右。但是驱动的后台cpu占用率一直在2%-5%之间浮动，我的cpu是intel的13600KF，这带来的电源功耗大约是10-25W，而且是持续功耗，这明显不合理。驱动程序的硬盘，内存和cpu的占用率都很高，这个驱动是不成熟的，如果没有降低功耗的办法，我考虑要退货了。这个产品很酷，但是驱动不成熟。

dockkey2023

bloodrock 发表于 2025-12-19 09:58
我也有同样的问题，屏幕本身的功耗并不高，大约2w左右。但是驱动的后台cpu占用率一直在2%-5%之间浮动，我的 ...

这个和功能相关的，如果只显示个图，或者加上几个字，功耗都可以低，你可以把插件卸载一些

vleds123

I received the update however it is the second time that I update the screen and it is stuck at "Current Status: Success - Please Wait"

I had to uninstall and re-install twice now it is still on this Current status page.

What should I do if update fails to install?

vleds123

I reinstalled and did the update however I don't see the option for selecting between CPU to GPU